How To Clean Your iPhone Microphone [Detailed Guide]
The iPhone Microphone is one of the most important components in your device. If you’re experiencing a lot of buzzing, crackling, and noise coming out of your iPhone’s microphone, this article is for you. In this article, we’ll show you how to clean the mic on an iPhone.
Why Clean iPhone Microphone is Important
The iPhone microphone is an important component of your device. It’s the only source of audio input, which means that it’s important to keep it clean and functioning properly. It can be difficult to clean the microphone on an iPhone, especially if you’re not familiar with all the small details. Luckily, we’ve created a tutorial that will show you how to clean your mic in a few simple steps.
Step 1: Remove the back cover from your iPhone
Take off the back cover of your iPhone by pulling off the plastic tabs on both sides of the plastic case. You’ll notice two metal prongs at either end of this part; these are used for connecting cables or chargers to your phone.
Step 2: Locate the round speaker grill
Find the round speaker grill behind one of those metal prongs mentioned above. There are multiple grills on iPhones, but this one is easy to spot because it protrudes out from behind the metal prong and has a mesh screen covering it.
Step 3: Take out any debris or dust
Using a toothpick or similar object, get rid of any debris or dust that’s stuck in between those mesh screens. Use caution when using anything sharp though-the mesh screens have been known to cut fingers!
Where To Find The Mic On Your iPhone
The mic on your iPhone will be located on the bottom of the device.
How To Remove The Mic From Your Phone
To remove the microphone from your phone, you need to follow these steps:
1. Put your phone in a bag or a container like a box.
2. Take off the back of the phone.
3. Peel up the three screws on the left side of the iPhone that are circled in red in this image below:
4. Carefully pull out the mic and set it aside for later use.
5. Flip your phone over and find two more screws on either side of where the headphone jack is located. These are also circled in red in this image below:
6. Remove these screws and also set them aside for later use.
Cleaning Your Mic
The first step is to have all of the necessary tools on hand, including a microfiber cloth and rubbing alcohol. After you have all of the materials, it’s time to start cleaning your mic.
First, you’ll need to open up your iPhone and remove the back panel. This will reveal the mic and other parts surrounding it. Next, you’re going to take out a Q-Tip and soak it in rubbing alcohol. After that, take your cloth and wipe down the area around the mic with the alcohol soaked Q-Tip. For added protection, use a second Q-Tip soaked in rubbing alcohol to clean off any leftover residue. Finally, insert your iPhone’s back panel back in place to finish cleaning up your mic. You’re done! You should now be able to hear clear calls on your device again.
Q: What tools will I need?
A: You’ll need a microfiber cloth and some rubbing alcohol. Q: Is there a specific method for cleaning the mic?
A: The first step is to use the microfiber cloth to clean around the microphone. Next, you should put some rubbing alcohol on the cloth and run it around the entire microphone carefully. After that, you should rinse out your iPhone’s Microphone with water. This article assumes that you have access to running tap water, but if not, you can use distilled water instead of tap water.
One of the most important features of your iPhone is the microphone. It allows you to talk on the phone and record in-person conversations. It’s also a major part of your phone’s overall functionality.
But what happens when you need to clean your microphone? In order to preserve your device’s functionality, it’s important to keep your microphone clean. Luckily, there are a few steps that can help you do just that!